Greyscalegorilla.com

6 Holiday Themed Cinema 4D Tutorials

Clones, Step Effector, and Atom Array Tutorial for Cinema 4D 147 Comments



In this tutorial, I try to recreate some of the effects in Ion’s beautiful Spherical Animation using the Cloner, Step Effector, Atom Array, and Cel Renderer. I also show you how to do the final composite in After Effects.

Sample Render

Light Kit Pro
HDRI Studio Pack

Comment Rules

This is a friendly community. Please treat everyone with respect. We don't all have to agree, but we do have to be nice. Criticism is fine, but rude comments and name calling will be deleted. Use your real name and don't be spammy. Thanks for adding to the conversation.

147 Comments

    • amar

      Amazing tut bro!!! But I’m facing a minor problem at the part in cloner where we get the amount down to 98% and set the mode to per step…my r15 is not showing those options…problem with the settings?

      Reply
  1. Steven

    Thanks… have seen this animation a few days ago and was about to rebuilt it… but as everybody know, time is the enemy #1… so thank you for this tutorial!!!

    Reply
  2. Awesome! I’ve seen this type of effect a lot lately and I’ve been trying to figure out how it was done! thanks a lot Nick! by the way, saw you at nab, great stuff as always!

    Reply
  3. Dries

    Very nice tutorial nick, but why not use the loop selection for the edges?
    Would’ve speeded things up a bit

    Reply
  4. I would recommend the loop-selection to select the inner part of the hemisphere. That saves some seconds and makes it a lot easier to mark the polygons at the edge.

    Awesome tutorial as allways!

    Reply
  5. Michael

    Hi!
    Welcome Back from NAB with a new TUT.
    Thank You
    Now i will sit back and watch :) (and of course learn!)
    Michael
    ps:watched nab at c4d live.com .(well,late for me in germany but great.)
    pps:xcuse my bad english.

    Reply
  6. No fresnel used!? What the heck man! Just kidding. Great tutorial. Thanks for truly breaking it down and recreating what was otherwise a complete enigma to me. As always, good work!

    Reply
    • Also while selecting those polygons on the hemi, using ring selection is much efficient

      Reply
        • Use the keyboard short cut U,L to bring up to bring up the Loop Selection Tool. Select the loop closes to the edge on the interior of the hemisphere. Then use the keyboard short cut U,F to bring up the Fill Selection Tool. While holding shift click on any of the remaining interior polygons and boom they are all selected.
          Like Nick says, in a 3D program there is always at least three ways to arrive at the same destination. For instance you could also have added thickness to the shape by selecting all the polygons and using the Extrude Tool (with create caps enabled)
          I would not have ever though to use the Atom Array. I’ve never tired it… but now that I’ve seen Nick mess around with it I may see what kind of cool shit I can get it to do.

          Reply
  7. Mauro

    Hey Nick! Great work! Thanks for share… Greetings from Argentina! =)

    Reply
  8. Laurel

    Sweet concept.
    Excellent tutorial – thanks Nick!
    Liked you NAB presentation, esp the CS tools shot w/in the city kit … a must have!

    Reply
  9. Karma

    Cool tutorial !

    Is possible this with the spline mask ??

    Thank u Gorilla !!

    Reply
  10. Martin

    nice ,i already busy to create something and try to combinate it with other stuff everthing will be as the subject sphere’s of what mades of it ;0)

    Reply
  11. Kieron

    ok i am on 11.5, whenever i try to add the materials, black for the set selection and white for the hemisphere it makes the whole object the same color, i have a little white lines in the center of each polygon of the set selection. ive gone through the tutorial step by step 3 times now and the same thing keeps happening. :-( anyone help please?

    Reply
  12. Kieron

    its ok, i ended up having to make two separate set selections and dragging each material onto them directly….
    thanks for the tut nick….more like this please they are so win :-)

    Reply
  13. Emil Draws

    When you’re doing that type of animation Auto Keyframing make the flow a lot better, you don’t need to click everytime you change something! :)

    Reply
  14. Hey Nick, first of all thanks a lot, its a real honor for me that you tried to recreate my work. Ive been working with Cinema4D for a year and a half, actually a started with the tutorials from your page, and a big part of what i know is thanks to you.

    Reply
    • Thanks, Ion. I really love your piece. I read that you were thinking about doing a “How To” video as well. I’m sure people would love to see how some of the more complicated stuff was made.

      Reply
      • I agree!
        And, Nick, what about the new Chris Camera rig coming up? When we’ll can buy it? slurp!! :)

        Reply
    • Michael

      Hey Ion, I am really interested to know how the part at 1:13 was created. It may be a lot simpler than I expect. Would you mind sharing? Great work btw, very inspiring.

      Reply
  15. Great tutorial, i did some stuff differently, but as you said, there are always many ways to make something in Cinema. As always, i learned something new from your tutorial.
    Thanks again and keep up the great work your doing !!!

    Reply
  16. Dean G

    Wikkid stuff was amazed when i saw the original video and now i can do it my self thanks to the Gorilla . . noice work. best thing is in theory (cos i ain’t tried it yet) you can do this with any shape . . or object like say half a human head the front half with face . . well maybe not actually mite cause some problems but anything is possible.

    Cheers Campbell Party on :)

    Reply
  17. Hey Nick, at the beginning you were selecting all of the inner polygons. you could of just don’t a loop selection at the top then used the fill selection. its 10x faster.

    Reply
  18. jonny

    Is there a way you could do it without the cloth simulator?

    Reply
    • In Spherikal, i actually didn’t use cloth simulation, nor hypernurbs, i just made a semi sphere, extrude with caps and bevel some edges, but Nick always brings other options and thats great.

      Reply
      • A noob question: How’d you extrude the hemisphere? With Mesh>Extrude? Extrude NURBS? I cannot find a way to do it. :-/

        Reply
  19. Great tutorial Nick!

    To make selecting polygons easier you can use the loop selection tool. (Shortcut U L) UI also inverts the selection. My two most used selection tools.
    Thanks Nick!

    andy

    Reply
  20. Like a couple of suggestions for poly selections previously, it would be quicker to do a loop selection around the top (U, L), and then use a Fill selection (U, F)for the remainder. All the polys will be selected in two steps. Boom!
    Thanks for the tut, Nick!

    Reply
    • Godmil

      I didn’t know about fill selection, thanks. I used expand selection when doing this one, which ment a lot of: UYUYUYUYUYUYUYUY :)

      Reply
  21. Steve

    Hello Nick, I saw some great tutorial by Chris Schmit about selecting polygones and stuff, really helpfull, check it out. ;-)

    Reply
  22. Well done Nick!

    Too bad you focused on the (at least for me) rather obvious parts. I’d love to know how the bits from 1:10-1:30 or 1:53 – 2:05 in the original were done.
    Any suggestions?

    Reply
  23. Very Nice!. Where do you get your music? I love the music you use on your projects (I miss living in a city).

    Reply
  24. Hi thanks for another great tut.But i have a question to ask.I have Cinema 4d R13 BROADCAST edition.
    Is there any way to convert that to studio?(I dont have the original one)

    Reply
  25. Sebastian

    Try U~L and U~F, should save you a couple minutes….

    Reply
  26. C4D'Dude

    This was amazing tutorial . I was always confuse about how to do this , and i learn it from you . So thank you wery much GSG.

    Reply
  27. giangianni

    really cool stuff, though I would not underestimate the cell render…
    for effects such as transitions from wire frame to final render it saved me more than once.

    Reply
  28. Mohamed Aljazaere

    Hi!
    Welcome Back NICK!!

    Very awesome way how u think about it..!
    What a creative man are you :)

    i will tray it with different shapes and see how it’s cool and sexy !

    Thanks alot ..

    Reply
    • hey, you know where is cloth nurbs? i can´t find it too

      Reply
  29. this is excellent. i’ve been trying to achieve something like this for a while. i will have to take a look at the tut to see how it’s done. thanks!

    Reply
  30. Lyonnel

    Nice tutorial.
    I tried with cyclic movements with cmotion and it’s nice too.

    Reply
  31. baris

    How do you do starting point i mean closing circle lines part?

    Reply
  32. Thanks for the great tutorial, Nick! I loved this one. It was about simplicity and doing cool stuff. I dig this the most! Can’t wait to see more of these ;)

    Reply
  33. Alex_K.

    Thanks for the tutorial! I learned new things and this is soo great! You´re the best Nick! Looking forward for your new plugin Transform!

    Here is my render… http://vimeo.com/40976590

    Reply
  34. Great stuff. I think I need to use the step effector more often. Seem like a great way to make things look cool and complicated without investing a lot of time and effort.

    Reply
    • creativephudge

      Great tutorial and I followed it carefully all the way through and gained a lot from it, however, it was at the point up opened up after effects you lost me. is there any chance you can explain how you put it all in, as its done and you just explain only small parts of the comp rather than a step by step like the c4d tutorial.

      many thanks

      Reply
  35. NitinR

    Hey Congrats Nick … for your new Office .. you are awesome!! Thanks Man for your great Tutorials .. use-full technique.. Tips and many more !!

    Reply
  36. Welvis Fernandes

    I wonder what site you get this sound library? Recommends a site?

    Reply
    • YUVAL

      HEY NICK..
      A LITTLE QUESTION…
      HOW CAN I ACHIEVE THE SAME RESULT BUT WITH OTHER ELEMENTS AND NOT A
      HEMISPHERE SOMETHING LIKE TEXT OR OTHER OBJECTS WHICH I HAVE TO MAKE ADDI TABLE BEFORE I PUT CLOTH NURBS ON THEM??

      Reply
    • Hey there, just figured out an option for this. Make a disc and use the white texture from Nick’s tutorial on it. Then make a second black disc immediately behind it. Break up the white disc with the method of your choice. I used Thrausi set to 20 pieces. Here’s the big trick: in the Mograph menu, add a PolyFX to the heirarchy under the Thrausi group. This tells MoGraph to treat all the separate pieces that Thrausi made (or that maybe you made using the Knife tool) like clones. Now you can drop a Step Effector in the middle of your white disc. In the parameter settings, set the transform mode to absolute and the make sure you’re only effecting the Scale. Set it to uniform scale and set the scale to zero. In the Falloff settings, set the shape to sphere and adjust the size so that at 100% scale, the step effector envelopes the whole disc. You can adjust the falloff slider to determine the distance from the most effected objects to the least effected objects. Then you can adjust the scale slider and you’ll see that it animates the way it does in Ion’s video. Viola! You can play with your disc settings and the settings of whatever you’re using to break it up to get different results. The main trick is using the PolyFx and Step Effector. You could also spice it up with a Random Effector and set the falloff to be driven by the Falloff settings from the Step Effector. Then you could randomize things like the rotation and position of the pieces as they shrink. Have fun!

      Reply
  37. Really nice Nick and Ion! I love cell render and sketch and toons, actually I’m working on a motion video with it. I hope there will be more tuts about the complicated stuff from Ion.

    Reply
  38. jerote

    Good way to do the selection of the inner polygons, instead of live selection, is the phong selection tool (Shortcut U, N) and instead of creating the selection, just double-click twice on the material panel to create the materials and drop one onto the selected polygons which automatically creates the selection tag, then invert selection (Shortcut U, I) and drop the other material onto those polygons to create the other selection tag. just my two cents. Awesome tuts as usual and great office!

    Reply
  39. Oscar

    Somebody help me, i can’t find a cloth i have cinema r13

    Reply
  40. Nathan

    Hello Nick, I have followed your C4D tutorials for about 3 months and I really appreciate your work. It helps me a lot and makes the study so interesting!

    After watching this tutorial, I tried some Mograph functions. But I got a problem. I tried to search answers on the internet but found nothing. Hope you can help me. Here’s the problem:

    I created a sphere, made it editable, disconnected all the faces and used “Fracture” in Mograph, changed the mode to “Explode Segments” to animate the pieces. Then I used a Step Effector, and animated the Position parameter so the pieces could fly along an “8″ shape path.

    But then I found a problem: I want the pieces to animate in different time, not start together and stop together. But seems like the “Step Effector” just affect the falloff, not the time offset, even though I turn up the “Time Offset”.

    I do remember the “Time Offset” is useful. Maybe it only affects the own animation of the child object? Because I tried a lot but none of the Mograph Effectors’ animation can be affected by the “Time Offset”.

    I also tried the falloff function. But those pieces affected later cannot do the right movement, because when “Falloff” comes to them, the “fly along ’8′” animation almost end.

    So how can I make the pieces fly along an “8″ shape in different time? Is there any way to make “Time Offset” work on Mograph Effectors’ animation?

    Thank you very much to read this…. I’ve be puzzled for several days, sorry to bother you. :P

    Reply
  41. Hey Nick,
    Love your stuff man, but with this particular tutorial I am missing a tool that you use, the “Cloth Nurbs” I have Cinema 4D Broadcast. I think this version of Cinema 4D does not have the “Cloth Nurbs” compared to Cinema 4D Studio. Is there anything else I can use to make the semi-circle thicker or am I S.O.L. Thanks man I am a true fan!

    -Blake

    Reply
  42. Airam

    Hi Nick,
    Thanks for your great tutorial, its fantastic.
    I have one question: What effect do you use, just at the start of the tutorial, when the thin line forms around the circle?

    Thank you so much!

    Airam

    Reply
  43. Lawrie

    can this be done in cinema 4d r 12 or 11.5? PLEASE HELP! THANKS

    Reply
  44. Morten Frool

    Hey! Amazing tutorial!

    Allthough I was wondering if it’s possible to combine the Sound Effector to control the rotation of the Step Effector? If it’s possible, I’m sure there is some Xpresso work to do, but I don’t know how to use Xpresso. So if anyone knows, please respond. It would help me out so much!

    In advance, thank you.

    Reply
  45. Hi Gorilla´s
    I love the tutorial, BUT I’m hear Cinema 4D R13, and is wondering if you could tell me if it can be done in that version as well ?

    (no cloth NURBS?)

    Reply
    • R13 has the clothnurbs: but check your version! Only broadcast and/or studio version has the Mograph, dynamics and hair stuff.

      So If you don’t have the cloth NURBS, follow along.
      1. Create sphere (select hemisphere) and make it editable.
      2. Duplicate the hemisphere (if it’s normal size (100 radius), scale the copy 1.01 up in X-Y-Z coordinates. (depends on the thickness you prefer).
      3. Select ‘Polygon selection tool’ (see Nick’s tut)
      4. select BOTH spheres (otherwise it wont work properly)
      5 rightclick in viewport window > Create polygon (shortcut M – E)
      6 close the edge of the spheres by connecting the points of both spheres!

      It’s a bit more work to make the thickness in your object, but if you’re done with that, you can continue to follow the tutorial!

      Ciao

      Reply
  46. Andrew

    As I’m trying this tutorial, I want to zoom into the form a bit more, but as you turn up the count for the clones, the gaps between the spheres gets bigger.

    Like, the cloth nurbs’ added thickness seems to get smaller faster than the model does.
    any way around this?
    I tried putting the cloner with a basic hemisphere inside a cloth nurbs, but the same thing still happened.

    Reply
  47. Hi!! here is with what i ended up, after following this amazing tutorial!!
    Hoe you guys liked it. Comments are more than welcome.
    https://vimeo.com/58790653

    Thanks Nick!! for everything you share to the community,

    Reply
  48. Nevermind

    I had to pause the video and say: “I love you Nick!”.

    P.S. I am not gay. :) )))

    Reply
  49. Sean

    Hey this is great man! Iv got a problem with the key frames though… animating the sphere (cloner) is fine but when i try to animate/record the ‘step’ part in a certain time period, it doesn’t do it. Instead, it fixes the final ‘step parameter rotation’ degrees and add that to the whole animation when i only want the step to animate after i’v moved the sphere.

    Reply
  50. Sultan

    Thanx for the Tutorial gorilla :)
    Just one tip for those applying the tutorial, a faster way to choose the inner polygons of the hemisphere would be to use “loop selection” under “Selection” .
    Shortcut for it :
    pressing “U” then “L” …
    U~L

    Reply
  51. Aron Brand

    this is such a wonderful composition!! original and redo! thanks Nick!

    Reply
  52. Patrick

    Is it possible to give a hemisphere thickness in any other way than “Simulate”? I am working in C4D Lite.

    Reply
  53. Tomek

    Hey, nice one like always, using loop selection and fill selection gonna speed up your workflow:)

    Reply
  54. Federico

    I love this stylish tut… I was trying to recreate the same look in After Effects with Plexus, but the result is not comparable with yours! Amazing! :D

    Reply

Leave a Reply

Comment Rules

This is a friendly community. Please treat everyone with respect. We don't all have to agree, but we do have to be nice. Criticism is fine, but rude comments and name calling will be deleted. Use your real name and don't be spammy. Thanks for adding to the conversation.